more...

Under Tile Heating / Underfloor Heating: Installation

Installing Safe-t-WIRE under tile heating / underfloor heating in your home could not be simpler, the kits come with everything needed for your licensed electrical contractor to carry out the installation by the following steps:

  • Select your thermostat position (a standard electrical supply is required).
  • Prime the floor.
  • Cable spacing in mm equalls area in m2 x 1000 divided by the length of selected cable.
  • Run out the cables and fix in place with tape provided.
  • Check resistance of cable (must match label on drum supplied).
  • Cover with 3 - 4 mm levelling compound.
  • Tile / carpet etc. your floor as normal.

For more detailed information about installing our underfloor / under tile heating, you can download the installation guide in pdf format from our downloads section.

Under-Tile Heating: Safe-t-Wire Cable Installation  Part 1

Under-Tile Heating: Safe-t-Wire Cable Installation #1


Under-Tile Heating Installation Pic 2

Under-Tile Heating: Safe-t-Wire Cable Installation #2


Under-Tile Heating Installation Pic 3

Under-Tile Heating: Safe-t-Wire Cable Installation #3


Under-Tile Heating Installation Pic 4

Under-Tile Heating: Safe-t-Wire Cable Installation #4


Under-Tile Heating Installation Pic 5

Under-Tile Heating: Safe-t-Wire Cable Installation #5


Completed under-tile heating cable installation with cut-section

Under-Tile Heating: A completed Safe-t-Wire cable installation with a cut-section